Sign in | English | Terms of Use
DictionaryForumContacts

   Chinese ⇄
Terms containing 爆炸成型 | all forms | in specified order only
SubjectChineseEnglish
tech.低爆炸成型low-explosive forming
met.接触式爆炸成型法contact-type operation of explosive forming
expl.无模爆炸成型基本原理有模爆炸成型主要依靠模具来控制零件的形状和尺寸。无模爆炸成型是金属板料在动载作用下造成各质点间的相对运动来实现的basic principle of modeless explosive forming
expl.气体的形成在很大程度上取决于诸多因素、如现场实际爆轰条件、岩石类型、炮孔直径、有没有水以及炸药在炮孔中是否均匀等The gas composition is strongly dependent on many factors such as actual field detonation conditions, rock type,hole diameter,water presence,product homogeneity in the hole
tech.爆炸成型detonation forming
tech.爆炸成型explosion shaping
expl.爆炸成型爆炸加工的一种方法。利用火药、炸药爆炸将金属加工成所需的形状explosive forming
tech.爆炸成型explosive swaging
tech.爆炸成型explosive forming
tech.爆炸成型explosion forming
expl.爆炸成型爆炸加工的一种方法。利用火药、炸药爆炸将金属加工成所需的形状explosive shaping
met.爆炸成型explosive fabrication
met.爆炸成型explosive pressing
met.爆炸成型explosive compaction
tech.爆炸成型aeroform
met.爆炸成型法explosive shaping
expl.爆炸等静压成型explosive isostatic pressing
tech.爆炸等静压成型法explosive processing
tech.爆炸等静压成型法explosive isostatic pressing
tech.直接式爆炸成型contact-type operation (of explosive forming)
met.粉 粉末爆炸成型法method of explosively compacting powders
met.粉末爆炸成型法method of explosively compacting powders
plast.粘接爆炸复合成型bonding explosive forming
expl.金属爆炸成型模型律在各类金属爆炸加工中,对于大型零件的爆炸成型，往往因材料昂贵，模具加工周期长，操作困难，工艺参数不能准确确定而不能直接采用大型件进行试验,只能采用模拟的小型件来探索真实零件加工时的工艺参数和工艺条件。这种方法便称为模型律model simulation of metal explosive forming
tech.金属爆炸成型法Dynaforming
tech.金属爆炸差厚成型法metal gathering
tech.间接式爆炸成型stand-off operation
tech.高爆炸力成型compacting by high explosive

Get short URL