DictionaryForumContacts

   Chinese
Terms for subject Metallurgy containing | all forms
ChineseEnglish
一次性取disposable sampler
一次抽检验single sampling
一次抽査取single sampling
一维衍射花one-dimensional diffraction pattern
三点加载缺口弯曲试notch bend three point loading specimen
三维衍射花three-dimensional diffraction pattern
上渣试flush sample
上部顶层upper sample
下型芯用core-setting gauge
下部试lower sample
与实物一大小的full scale
严格抽检査tightened sampling inspection
中央切口试centrally notched specimen
中子衍射花neutron diffraction pattern
中心缺口板材拉伸试centre notched sheet tension specimen
中心缺口试centrally notched specimen
中心裂纹试centre cracked specimen
中部试middle sample
中间包内取位置sampling position in tundish
中间层试middle sample
二维衍射花two-dimensional diffraction pattern
亚晶界图pattern of sub-boundary
位错图pattern of dislocation
低倍分析试macrospecimen
低倍试macrotemplate
低含量贵重组分试low assay
低角衍射花low-angle pattern
体视试stereoscopic specimen holder
侧向弯曲试side-bend specimen
偏压检验试bias check sample
停吹所取的interrupted -blow slag sample
停吹所取的interrupted-blow slag sample
光弹性条纹花photoelastic fringe pattern
光滑试拉伸性能smooth tensile property
光滑试拉伸性能smooth-tensile properties
光面无切口拉力试compact tension specimen
全截面试full section specimen
全焊金属试all-weld -metal test piece
GECO 公司自动取GECO automatic sampler
sample splitter
dividing box
dividing box
谱线analytical line
分层试stratified sample
分批取检査lot sampling inspection
分散取discrete sampling
分析取analytical sampling
分析纯试analar sample
分析试assay sample
试金分析试assay sample
分析试analysis sample
分格取riffle sampler
sample cutter
切口拉伸试notched tensile specimen
切口试notch specimen
切槽试脆性断裂拉力试验美国美孚石油幵发公旬的Standard Oil Development Co. test
初轧大方坯试bloom sample
刮板模sweep pattern
preparation of sample
specimen preparation
副枪型取sublance type sampler
副枪试元素的快速分析rapid analysis of elements in sublance sample
分析ladle sample analysis
切割器ladle sample cutter
制备ladle sample preparation
平均值average ladle sample value
形状ladle sample shape
形状ladle sample geometry
成分ladle sample composition
成分ladle chemistry
抛光机polishing machine for ladle sample
断面ladle sample section
标准偏差ladle sample standard deviation
算术平均值arithmetic average value of ladle sample
缩分ladle sample reduction
试验ladle test
试验ladle sample test
重量ladle sample weight
化学分析试chemical analysis sample
区层取zone sampler
十字形试cruciform test specimen
单一 X 射线图single X-ray pattern
单个试individual sample
单位体积试unit-volume sample
单侧缺口拉伸试single-edge notch tension specimen
单分取single-split sampler
压坯试compact specimen
压模面die-face template
金属bare metal
原始标准试primary standard sample
原始试original sample
原始试bulk sample
原矿取head sampling
原矿取head sampler
原矿试head sample
吹氩搅拌炉次的板坯试slab sample from argon-stirred heat
吹炼终点试end-blow sample
周期取intermittent sampling
周转晶体X射线衍射rotating-crystal X-ray pattern
和……一样【相等match
商品试sale sample
圆柱形试cylindrical specimen
圆棒试round bar specimen
圆环试ring-shaped specimen
圆角radius gauge
圆角fillet gauge
圆试round specimen
坯料试blank sample
垂直摆动取vertical-swing sampler
型芯core template
堆取pile sampling
塔形铸造steep bar
塞格尔流动性螺旋Saeger spiral
塞格尔流动性螺旋Saeger spiral
填充金属试filler metal test specimen
夏氏 V 形缺口试冲击动能Charpy V-notch impact energy
夏氏 V 形缺口试冲击试验Charpy V notch test
夏氏 V 形缺口试冲击试验Charpy V-notch impact test
夏氏 U 形缺口试冲击试验Charpy U notch test
夏氏钥孔形缺口冲击Charpy key hole specimen
夏氏钥孔形缺口冲击试Charpy keyhole specimen
multiplicity
多晶体衍射花polycrystal diffraction pattern
多试试验机multispecimen testing machine
大容量空气取装置high volume air sampler
大理石表面加工marbelized finish
失败试failed test piece
子试subsample
孔型pass template
type face
T 字形弯曲试tee-bend specimen
T 字形弯曲试tee-bend specimen
安装图erection drawing
宏观分析试macrospecimen
宏观试macrotemplate
定性应变图qualitative strain pattern
定性的应变图qualitative strain pattern
模型full pattern
模型block pattern
实验室用试laboratory sample
X 射线衍射X-ray pattern
X 射线衍射衍射计记录diffractometer registration of X-ray pattern
X射线粉末法衍射花X-ray powder pattern
取样increment sampling
小间距取close sampling
尺寸走non-sizing
尾矿分段取section tailings sampler
尾矿取tailing sampling
尾矿试tailing sample
层状试stratified sample
带式取conveyer-type sampler
带材试strip specimen
带缺口试notch-break specimen
干涉图fringe pattern
干涉条纹花interference fringe pattern
干涉花图样interference pattern
干粉末试dry powder specimen
干粉末试dry powder specimens
平均试average sample
平面试test plate
并合试composite sample
底层试lower sample
mode
way
make
弧线摆动式取swinging arc-path sampler
弧线运动取arc-path sampler
弯曲bending former
弯曲bending form
弯曲板直径bending former diameter
弯曲持久试fatigue bending test specimen
弯曲持久试endurance bending test specimen
弯曲疲劳试fatigue bending test specimen
弯曲疲劳试endurance bending test specimen
弯曲试bending test piece
V 形缺口夏氏冲击试V-notch Charpy specimen
V 形缺口试vee-notched specimen
U 形试垂直抗拉强度U-strength
U 形试点焊拉伸试验U-tensile test
U 形试点焊拉伸试验U-tensile test
循环取round sampling
gross sample
总试general sample
总试bulk sample
悬臂弯曲预裂纹试precracked cantilever bend specimen
扁平模flat pattern
扁试flat specimen
手工取hand sampling
手杓取试验spoon test
扫描试支架scanning specimen holder
扭转试torsion test piece
grab sampling
抓斗取bucket sampler
抛光的试polished sample
持久强度试endurance-test piece
板加工finishing to gauge
板加工finish to templet
板加工finish to gauge
板手工切削guided manual cutting
板精加工finishing to gauge
材料试验按比例配制的试proportioning probe
按比例配制的试proportioning probe
按比例采取的试proportionated sample
挠曲模wraped pattern
振动取vibrating sampler
振动式取vibrating sampler
振动管取vibratory tube sampler
控制取control sampling
控制用标准试control standard sample
摆动式取oscillating sampler
摆动箱式取tilting box sampler
摆动箱式取tilting-box sampler
摆式取pendulum-type sampler
工序templating operation
操作templating operation
放出出钢,出铁tapping sample
放出金属液试tapping sample
整截面试full section specimen
斑点衍射花mottled diffraction pattern
斗式取bucket sampler
断口fracture mode
断裂试fracture sample
显微检验用试microtest piece
显微试microtest piece
晶格图lattice pattern
木模wood pattern
未经受住试验的试failed test piece
末端淬火标准试standard end-quench test bar (用于测量钢的淬透性)
末端淬火试end-quench-test piece
末端淬硬试end-quench-test piece
机械取mechanical sampling
机械取mechanical sampler
机械取machine sampler
机械取设备mechanical sampling equipment
机械取设备mechanical sample taking equipment
spoon sample
条状试strip specimen
条纹图fringe pattern
松弛试relaxation test piece
标准reference specimen
标准master gauge
标准模standard pattern
标准模standard model
标准试standard specimen
标准试reference specimen
标准试standard sample
标准试standard material
标准试reference material
标定粉末法衍射花指数用图解法graphical method for indexing the powder pattern
树枝状图dendritic pattern
校准试standard sample
sample piece
mock-up
pattern
standard
model
exponent
symbol
sample (Fluxes used for the casting of medium carbon, low carbon and super ultra low carbon (SULC) steel grades were sampled to compare properties. 对中碳钢、低碳钢和超超低碳钢连铸用保护渣进行了取样,以便比较其特性。)
test sample
dummy
品台调节装置specimen stage control
品头specimen head
品夹specimen holder
品夹sample holder
品室sample chamber
品尺寸sample size
品屏specimen screen
品平均值sample median
品数量sample quantity
品有限尺寸引起的增宽broadening due to finite specimen size
品材料specimen material
品瓶sample bulb
品研磨机sample grinder
品试验specimen test
品试验sample test
品间sample chamber
prototype machine
test machine
model
试制工厂prototype plant
control gauge
former
gauge
master
master plate
shaping plate
template board
量规templet
template (用于调整轧辊、检查尺寸、校核对中等)
templet (用于调整轧辊、检査尺寸、校核对中等)
template board (用于调整轧辊、检查尺寸、校核对中等)
follow board
model
gage
cam
板规shape gauge
sampling mold
核对check sample
核对取check sampling
格槽分riffle
格槽缩riffle
ladle sample
分析ladle analysis
化学分析chemical analysis of ladle sample
化学成分chemical composition of ladle sample
化学成分ladle chemistry
试验ladle sample test
试验ladle test
桶中取ladle sampling
桶内取ladle sampling
桶内取ladle sample
梁式试beam specimen
梅氏冲击试Mesnager impact test piece
梅氏冲击试Mesnager impact test piece
梅氏冲击试缺口Mesnager notch
楔形张开加载预裂纹试precracked wedge-open loading specimen
楔形试wedge-shaped specimen
楔形试wedge -shaped specimen
pattern
dummy
patternmaker
托板moulding board
横向弯曲试transverse bend specimen
横向角焊缝剪切transverse fillet weld shearing specimen
横向试transverse sample
横向试transverse test-piece
次分试subsample
正面弯曲试验face-bend test specimen
气体煤气gas sampling
气体取gas-sampling probe
气体取gas sample collector
气体取gas sampling hole
气体试gas sample
气体试采集器gas sample collector
气力送air slide conveyer
气动送系统pneumatic conveying system of specimen
水分湿度moisture sampling
水分含量moisture sample
沉浸式取immersion sampler
流动性螺旋Saeger spiral
流动性螺旋fluidity spiral
流动性试浇铸fluidity test casting
流槽试runner sample
slag sample
slag specimen
渣沟取trench sampling
炉内同会形成 M 形料面。M
炉前试分析on-the-spot sample analysis
炉料自动取automatic sampling of burden
炉渣试slag sample
炉身取装置stack probe (【技】用于沿高炉炉身料层径向采集各点试样并进行测温的专设机构。)
焊接试验welded test sample
焊接试welded specimen
焊缝尺寸检査用welding gauge
焊缝金属试weld metal specimen
焊缝金属试weld-metal specimen
熔体试molten test sample
熔池取bath sampling
熔池取sampling from bath
熔池取spoon sample
熔池杓spoon sample
熔池试bath sample
熔渣试liquid slag sample
熔融金属试hot metal sample
片状试napkin
物理检验试physical testing sample
特征应变图characteristic strain pattern
玫瑰花状图rosette pattern
玫瑰花状图rosette pattern
生长花growth pattern
用管取pipe sampling
由炉内放出的金属液试tapping sample
电子显微镜试支架electron microscope specimen holder
电子衍射花electron diffraction pattern
畸变试distortion specimen
真空状态下制备的试vacuum prepared sample
真空制备的试vacuum-prepared sample
砂中浇铸取sand-cast sample
砂铸试sand-cast sample
破断试验用缺口试notch-break specimen
空心钻取检验hollow drill testing
空气取air sampling method
空气取air-sampling vessel
空穴形成断口fracture mode by void formation
空穴形成的断口fracture mode by void formation
笛管式取whistle-pipe sampler
等动态isokinetical sample
等速取isokinetical sampling
筒锯锯切试trepan saw specimen
简并degenerate specimen
简易模temporary pattern
管式取pipe sampler
管式取gun sampler
管状分tubular splitter (试样的)
粉末晶体X 射线衍射花powdered-crystal pattern
粉末法 X 射线衍射示意图diagrammatic powder pattern
粉末法 X射线衍射示意图diagrammatic powder pattern
粉末法X射线衍射图powder pattern photograph
粉末法X 射线衍射specimen for powder work
粉末法衍射图的线分辨能力line resolution of powder pattern
粉末法衍射花powder pattern
粉末法衍射花解释interpretation of powder pattern
粒状试shotted sample
紧凑拉伸试compact tension specimen
紧凑拉伸试CT specimen
缓冷试slow-cooled specimen
division of sample
缩分取curtailed sampling
缩分试subsample
缺口冲击弯曲试notched bar impact bending test specimen
缺口拉伸试notched tensile specimen
缺口楔形张开加载试notched WOL specimen
缺口楔形张开加载试notched WOL wedge opening loaded specimen
缺口试notched test bar
缺口试notched test piece
缺口试notched bar
缺口试notched specimen
缺口试交变弯曲试验alternating notch bending test
缺口试冲击弯曲试验notched-bar impact bending test specimen
缺口试冲击强度notched bar impact strength
缺口试冲击试验notched bar impact test
缺口试冲击试验notch-bar impact test
缺口试弯曲试验notched bar bending test
缺口试弯曲试验notched bending test
缺口试弯曲试验notch bend test
缺口试拉伸试验notched tensile test
缺口试拉伸试验notched bar tensile test
缺口试冲击断裂试验nicked fracture test
缺口试疲劳试验notch-bar fatigue test
缺口试冲击试验notched bar test
缺口试冲击韧性notched bar toughness
缺口试冲击韧性试验值notched bar toughness
考塞尔图Kossel pattern
考塞尔花Kossel pattern
肥皂soapy
腐蚀试corrosion-test piece
腐蚀试corrosion testing sample
腐蚀试corroding proof
艾氏冲击试Izod test piece
范德维恩慢弯曲脆断缺口Van der Veen specimen
范德维恩慢弯曲脆断缺口试Van der Veen specimen
切片机microtome
硬度计microdurometer
薄片试napkin
薄试thin specimen film
虚线图spotty pattern
衍射花diffraction pattern
衍射花线pattern line
衍射花记录diffraction pattern registration
sale sample
分析truck analysis (从车上取出试样进行分析)
车削轧辊用roll-turning template
车厢试car sample (车辆上的取样)
车箱试car sample
轧制pass template
轧辊车削roll-turning template
轨梁试beam specimen
辐照燃料模fizzium
退火试annealed specimen
ring sampler
透明试transparent specimen
通用试general sample
steel sample
sample of steel (A sample of the steel is analysed and adjustments to the composition are made by adding ferroalloys. 对钢样进行分析,然后加人铁合金调整钢水成分。)
中间值steel sample median
减分steel sample division
分析仪steel sample analyzer
切割器steel sample cutter
制备steel sample preparation
取样器steel sampler
尺寸steel sample size
平均值steel sample median
抛光机steel sample polishing machine
断面steel sample section
样品室steel sample chamber
氧燃定碳法Strohlein method
缩分steel sample reduction
钢丝试wire specimen
钢包试ladle sample (A substantial decrease (> 0.005 percent) in the soluble aluminium content between the last ladle sample and mold is an excellent indication of a reoxidation problem at the caster. 结晶器(钢水中)溶解铝含量如果比钢包最后一次试样溶解铝含量大幅度降低(>0.005%),那么这是连铸机存在二次氧化问题的最好标志。)
钢材取test piece
钢锭取ingot sampling
钥孔形冲击试key-hole specimen
锐线 X 射线图sharp-line X-ray pattern
锐角切口薄板试sharp edge notched sheet specimen
锥形取cone sampler
锥形试试验tapered-bar test
mounting press
长筒式取pipe sampler
长筒形取gun sampler
阴极试cathode sample
附铸试cast-on test piece
随机random sample
顶层试upper sample
顺序多次sequential multiple sampling
顺序多次取sequential multiple sampling
预制裂缝试preflawed specimen
预破裂试precracking specimen
風口取装置probe through tuyere
验收取acceptance sampling
Showing first 500 phrases