Chinese | English |
tool一tooling 制造通用工装的工具 | general (对通用工装的制造或组装提供必要的特点或对这类 GT 提供尺寸性和功能性的控制手段而制造的工具) |
pattern一production 复制型胎一一生产用 | duplicating (是一种表面与三维的复杂外形构造面完全一致的模型。用作制导工具,将随动装置的方向性运动转换为切削刀具的运动) |
chart一tooling 对比放大图---------工具制造用 | comparator (是绘制在质地稳定的绘图胶片上的放大图。绘出了车刀或铣刀的尺寸外形构造线,供光学投影仪以影像投影的方法验证该刀具的精度) |
一级温度控制阀 | primary temperature control valve |
一贯单位制 | coherent system of unit (of measurement) |
三位置控制开关 | three-position switch |
三检制 | tri-inspection system |
三相四线制标准电能表 | 3-phase 4-wire standard watthour-meter |
三轮升压式空气循环制冷系统 | three-wheel bootstrap cycle refrigeration system |
三轴控制 | three-axis control |
三进制 | ternary |
三项控制 | three-mode control |
上升推力向量控制 | ascent thrust vector control |
上升段推力向量控制 | ascent thrust vector control |
上控制界限 | upper control limit |
上方控制面板 | upper panel |
原上海航空工业集团公司工作指令控制通报 | SAIC work order control bulletin |
Factory上海飞机制造厂 | Shanghai Aircraft Manufacturing (原属中国一航,从 2008 年 4 月16日起,属于中国商用飞机有限责任公司。2009年5月25日,改制为上海飞机制造有限公司 (SAMC ),成为中国商用飞机有限责任公司总装制造中心) |
上海飞机制造厂 | Shanghai Aircraft Manufacturing Factory |
上海飞机制造有限公司总装制造中心 | Shanghai Aircraft Manufacturing Co., Ltd. Manufacturing Center |
上海飞机制造有限公司企业标准工艺材料目录 | Index of process material in SAMC process specification |
上海飞机制造有限公司工作指令控制通报 | SAMC work order control bulletin |
上海飞机制造有限公司工程技术工作程序 | SAMC engineering technology operational procedure |
上海飞机制造有限公司工艺材料 | SAMC process material |
上海飞机制造有限公司工艺规范 | SAMC process specification |
上海飞机制造有限公司工装通报 | SAMC tooling bulletin |
上海飞机制造有限公司——总装制造中心 | Shanghai Aircraft Manufacturing Co., Ltd. (Manufacturing Center, 2009年5月25日,由原上海飞机制造厂改制为上海飞机制造有限公司,归属于中国商用飞机有限责任公司“COMAC ”,也是中国商用飞机有限责任公司的总装制造中心) |
上海飞机制造有限公司数控工作程序 | SAMC numerical control procedure |
上海飞机制造有限公司更改委员会 | SAMC Change Board (主要负责构型管理和工程更改的日常工作) |
上海飞机制造有限公司构型控制/更改控制委员会 | Configuration Control Board |
上海飞机制造有限公司构型管理办公室 | SAMC Configuration Management Office |
上海飞机制造有限公司构型管理委员会 | Configuration Management Board |
上海飞机制造有限公司波音项目更改委员会 | SAMC Boeing Program Change Board |
上海飞机制造有限公司空客公司项目交付计划 | production Shanghai Aircraft Manufacturing Corporation, Ltd. (上飞公司继与麦道、波音进行国际化合作以来,为了持续航空零部件的转包项目,开拓欧洲转包市场,学习空客的管理经验,2006年2月20日,与空中客车工业公司、中航国际控股有限公司共同签署了空客A 320货舱门门框的制造合同) |
上海飞机制造有限公司空客公司项目交付计划 | production Shanghai Aircraft Manufacturing Corporation., Ltd. |
上海飞机制造有限公司管理程序 | SAMC control procedure |
上海飞机制造有限公司规范支持标准 | SAMC support standard |
上海飞机制造有限公司质量工作程序 | SAMC quality procedure |
上海飞机制造有限生产工艺计划程序 | SAMC production planning procedure |
下一代空中交通管制系统 | next generation air traffic control system |
下凹控制 | notching control |
下弯限制器 | droop stop |
下控制界限 | lower control limit |
下游控制区 | downstream region |
下降模式座舱压力变化率限制值 | cabin pressure rate limitation in descent |
不受控制的 | uncoupled |
不受控制的平均位置 | uncontrolled mean location |
不受控制的漩涡 | uncontrolled vortex |
不受控制的飞机 | uncontrolled jet |
不可控制月份 | out of control months |
不合格产品控制 | control of non-conforming product |
不合格品的控制 | control of nonconforming products |
不合格品评审控制中心 | review and control center for nonconforming products (指“转移性”拒收的不合格器材和不合格供应品进行处理的受控扣留区) |
不合格品评审控制中心 | material review control center (对拒收的不合格品进行处理的受控扣留区) |
不确定的控制效率矩阵 | uncertain control effectiveness matrix |
不稳定的制度 | unstable system |
不符合材料控制 | nonconforming material control |
不能在某一频率上与空中交通管制机构通话 | negative contact |
不能复制 | cannot duplicate |
不规则四边形调制 | trapezoidal modulation |
不锈钢制落锤模 | hammer die stainless steel |
不饱和控制 | unsaturated control |
与研制计算机有关的 | computer-oriented |
专用制造大纲 | fabrication outline special purpose |
专用制造说明 | special manufacturing instructions |
专用发电机控制装置 | dedicated generator control unit |
专用控制和监控模块 | dedicated control and monitor module |
专用显示器与控制装置 | dedicated display and control unit |
专用激光技术研制计划 | special laser technology development program |
企业数字精业制造交互式应用 | digital enterprise lean manufacturing integrated application |
刀具制造厂 | toolmaker |
刀具制造工 | toolmaker |
分发数字控制 | distribution numerical control |
分子筛制氧 | molecular sieve oxygen generation |
分散控制器 | decentralized controller |
分散控制律 | decentralized control law |
分时控制 | time sharing control |
分析减速控制 | analytic drag control |
分析器材-记录器-控制器 | analyzer-recorder-controller |
分离控制 | separation control |
分离监控器和控制系统 | separation monitor and control system |
分离监控器控制装置 | separation monitor control unit |
分离系统制动器 | split system breaker |
分类控制站 | classified control station |
分级多普勒控制板 | fractional Doppler gate |
分配制度 | distribution system |
分配指令和控制 | distribution command and control |
分配控制中心 | distribution control center |
分配控制系统 | distribution control system |
列控制器 | column controller |
包干制 | supply system |
包线限制 | envelope limit |
化学制剂 | chemical agent |
化学分析探测仪器控制 | chemical analysis detection instrumentation control |
北京航空工程制造研究所 | Beijing Aeronautical Manufacturing Technology Research Institute |
北大西洋公约组织制造商供应代码 | NATO supply code for manufacturers |
合作控制 | cooperative-control |
合格制造商目录 | qualified manufactures list |
合格制造商目录 | qualified manufacturers list |
同步器控制 | synchronizer control |
同步控制器 | synchronous control unit |
同步非归零制 | synchronous nonreturn-to-zero |
后勤控制号码 | logistics control number |
后勤支援分析控制号码 | logistic support analysis control number |
后反作用力控制子系统 | aft reaction control subsystem |
后反作用力控制子系统 | aft reaction control system |
后装载控制器 | aft load controller |
后轮制动器 | rear wheel brakes |
后载荷控制组件 | aft load control assembly |
后部事故控制器 | aft events controller |
后部功率控制器 | aft power controller |
后部动力控制器组件 | aft power controller assembly |
后飞行甲板控制区域 | aft flight deck control area |
向下调整控制 | trim down control |
向目视观察不到的目标制导 | blind guidance |
圆形限制性三体问题 | circular restricted three-body problem |
处理器、接口控制与通信 | processor, interface control and communication |
备件分析、文件编制与评估 | spare parts analysis, documentation and evaluation |
备件定购和不中断库存控制 | spares ordering and non-stop inventory control |
备件定购和不中断库存控制系统 | spares ordering and non-stop inventory control system |
备件库存控制报告 | spares inventory control report |
备件控制系统 | backup control system |
备件综合报告与控制系统 | spares integrated reporting and control system |
备件订货和无库存控制 | spares ordering and non-stop inventory control (system, 系统) |
备份控制与接口装置 | backup control and interface unit |
客备用刹车控制组件 | alternate braking control unit |
备用地面控制站 | backup master control station |
备用导航控制显示装置 | alternate navigation control display unit |
备用拦截导弹控制 | backup interceptor control |
备用拦截控制系统 | back-up interceptor control (美国地面防空系统的组成部分) |
备用指令和控制中心 | alternate command and control center |
备用指挥和控制中心 | alternate command and control center |
备用指挥和管制中心 | alternate command and control center |
备用探测和控制装置 | alternate detection and control unit |
客备用控制模块 | backup control module |
客备用的多用途刹车控制 | alternate braking control manifold |
备用航空电子计算机控制 | alternate avionics computer-control |
备用航空电子计算机控制 | alternate avionics computer control |
备用飞行控制 | backup fight control |
备用飞行控制系统 | backup flight control system |
支复制型胎工艺装备用 | duplicating pattern-tooling |
支复制型胎生产用 | duplicating pattern-production |
复制型胎一工艺装备用 | duplicating pattern—tooling (是一种表面与三维的复杂外形构造面完全一致的模型。根据它来精确复制生产产品用的工具,直接控制最终使用的工装表面) |
复制材料制造商协会 | association of reproduction material manufacturer |
复制模拟件 | dummy part (是对一零件、组件或制品的一部分的复制样品。按名义尺寸制造,并被认为某种安装工作,如布管、接线等工作的制造、检验所用的尺寸权威依据) |
支复制模拟件 | dummy part |
复制模拟件的标准样件 | dummy part master (是制造和控制模拟复制零件所用的尺寸权威依据。这种依据样件将与 ICT“控制互换性的工具”相协调。ICT 是用来对所连接的孔排列形式进行控制的一种尺寸权威依据) |
支复制模拟件的标准样件 | dummy part master |
复合材料制造与装配中心 | composite fabrication and assembly center |
复飞控制系统 | go-around control system |
夏威夷控制中心 | Hawaii control center |
外回路控制 | outer loop control |
外来资金限制 | external finance limits |
外测体制 | tracking system |
外电源控制继电器 | external power control relay |
外部制造规范计划 | outside manufacturing specification plan |
外部电源控制继电器 | external power control relay |
外部电源控制装置 | external power control unit |
外部编程控制的测试试设备 | externally-programed test equipment |
外部编程控制的试验设备 | externally-programed test equipment |
外部调制 | external modulation |
外部通信控制 | outer communication control |
射击点火控制电子装置 | fire control electronic unit |
射击指挥仪型火力控制 | director-type fire control |
射击控制 | gun control |
射击控制系统 | fire-control system |
射击控制设备 | fire control material |
射击限制器 | fire interrupter |
射流式飞行控制系统 | fluidic flight control system |
射流推力向量控制 | fluid injection thrust vector control |
射频限制与电子对抗 | RF surveillance and ECM |
“小斗犬”全天候制导系统 | Bullpup all-weather guidance system |
“小斗犬”自动制导系统 | Bullpup automatic guidance system |
小飞机制造商协会 | small aircraft manufacturers association |
开关控制装置 | switch control assembly |
开发构型控制 | development configuration control |
开始时刻控制线 | h-hour control line |
开放式控制平台 | open control platform |
异步数据链控制 | asynchronous link control |
异步数据链控制 | asynchronous data link control |
异步调制调解器 | asynchronous modem |
异步通信控制 | asynchronous communication control |
引信控制导线组件 | fuse control cable assembly |
炸弹引信旋翼制动器 | arming vane stop |
引导控制 | pilot control |
引气压力比控制 | pressure ratio bleed control |
引气控制活门 | bleed control valve |
引气控制系统 | bleed air control system |
引线制导 | wire guidance |
成形轧制 | roll forming |
成本和设计控制系统原则 | cost and schedule control system criterial |
成本和进度控制系统 | cost and schedule control system |
成本控制程序 | cost control program |
成本/计划控制系统准则 | cost/schedule control system criteria |
成本/进度计划与控制规范程序 | cost/schedule planning and control specification program |
成本限制审査委员会 | cost limit review board |
持久系统控制数码 | permanent system control number |
指令制导导弹 | command guided missile |
指令制导询问器 | command guidance interrogator |
指令和控制子系统 | command and control subsystem |
指令和控制子系统 | command and control system |
指令与控制信息处理 | information processing in command & control |
指令信号限制器 | command signal limiter |
指令和控制 | command and control |
指令控制与研制部 | command control and development division |
指令控制信息系统 | command control information system |
指令控制分系统 | command control subsystem |
指令控制台 | command control console |
指令控制号码 | order control number |
指令控制号码 | command control number |
指令控制和监控系统 | command control and monitor system |
指令、控制和通信 | command, control and communication |
指令控制声纳浮标系统 | command active sonobuoy system |
指令控制处理显示系统 | command control processing display system |
指令控制记录 | order control record |
指令控制设备 | command control equipment |
指令数据链控制字码 | command link control word |
指令、显示与控制 | command, display and control |
指令界面接口控制 | command interface control |
指令选择控制子系统 | command selection control subsystem |
指令选择控制机构 | command selection control |
指向和姿态控制系统 | pointing and attitude control system |
指引控制功能 | direct control function |
指挥与控制中心 | command and control center |
船指挥,控制与通信舰 | command, control and communication ship |
指挥控制台 | command console |
指挥,控制和通信 | command, control and communications |
指挥控制所 | command control post |
指挥控制站 | command and control station |
指挥,控制,通信和情报 | command, control, communications, and intelligence |
指挥,控制,通信,计算机和情报 | command, control, communications, computers and intelligence |
指挥,显示与控制 | command, display and control |
指示器和控制 | indicator and control |
指示器控制盒 | indicator control box |
指示器控制装置 | indicator control unit |
指示器显示/控制 | indicator display/control |
指示器灯控制盒 | indicator light control box |
按制造规范购买 | buy per manufacturing specification |
按时到达时间控制 | arrival-time control |
按比例复制 | scale |
按钮控制照相亮度指示器 | pushbutton indicator |
按钮控制指示器 | push button indicator |
按钮控制盘 | push button panel |
按钮控制选择开关/指示器 | pushbutton selector/indicator |
最优控制理论 | theory of optimal control |
最低控制速度 | minimum control speed |
最佳启动控制 | optimum start control |
最佳自动控制 | optimum automatic control |
最佳转发控制 | optimal retransmission control |
最佳飞行控制系统 | optimum flight control system |
最后控制点 | final control point |
最大制动能量速度 | maximum brake energy speed (它是关于总重、高度、温度、跑道坡度、风量以及制动结构的函数。它的值必定小于V₁) |
最大有效控制速度 | active maximum control speed |
最大运行限制速度 | maximum operation limit speed |
客最大飞行限制速度 | maximum operating limit speed |
最大飞行限制允许速度或马赫数 | maximum permissible operating speed or Mach number |
最小压力控制系统 | minimum pressure control system |
最小工程研制 | minimum engineering development |
最小控制 | minimum control |
最小控制地面速度 | minimum control ground speed |
客最小控制空速 | minimum control airspeed |
最小控制空速 | minimum control airspeed |
最小有效控制速度 | active minimum control speed |
最小空中控制速度 | minimum air control speed |
最小速度控制模式 | minimum speed control mode |
最快速控制系统 | time optimal control system |
最终控制站位 | final control station |
最终研制发放 | final development release |
最终研制审査 | final development review |
最经济控制 | most economic control |
最高温度控制 | top temperature control |
最高温度控制 | top-temperature control |
有人控制反潜艇直升机 | manned anti-submarine helicopter |
有控制的迫降 | controlled ditching |
有效抑制 | active suppression |
有效温度控制系统 | active thermal control system |
有效的控制号码 | activity control number |
有效的热控制系统 | active thermal control system |
有效载荷搭载容器控制译码器 | gas control decoder |
有效载荷操作控制中心 | payload operations control center (美国) |
有效载荷操作控制中心网 | payload operation control center network (美国) |
有效速度控制系统 | speed control system valid |
有源热控制子系统 | active thermal control subsystem |
有源热控制系统 | active thermal control system |
有空中交通管制的飞行 | environmental flight |
有线制导 | cable guidance |
有线制导鱼雷 | wired-guided torpedo |
有翼制导火箭助推弹 | guided finned rocket assisted projectile |
有重量限制的 | weight-limited |
有限制的 | qualified |
有限控制体 | finite control volume |
服务器前端控制 | server headend control |
服务通报管理和控制系统 | service bulletin management and control system |
标准制造工序 | standard manufacturing procedure |
标准军用制图程序 | standard military drawing program |
标准化航空导航与制导 | standardized aeronautical navigation/guidance |
标准和质量控制部门 | standard and quality control department |
标准工装控制 | master tooling control |
标准战区陆军指挥与控制系统 | standard theater army command and control system |
标准控制功能 | standards control function |
标准控制量规 | master control gage |
标准有效载荷显示和控制接口 | standard payload display and control interface |
标准波束着陆制导系统 | standard beam landing guidance system |
标准界面/接口控制文件 | standard interface control document |
标准研制程序 | standard development procedures |
标准航空电子综合控制系统 | standard avionics integrated control system |
标准飞机武器监控器与投弹控制系统 | standard aircraft weapon monitor and release control system |
标工控制图 | master control drawing (用于控制尺寸、公差的工装图,它代替了真正的标工) |
支标工控制图 | master control drawing |
标称控制力 | nominal control force |
民用航空交通管制 | civil air traffic operations |
民用飞机先进制造技术实验室 | civil aircraft advanced manufacturing technology laboratory |
气动空气动力控制 | aerodynamic controls |
气动低空控制系统 | barometric low altitude control system |
气动力制动 | aerodynamic braking |
气动弹性响应控制 | control of aeroelastic response |
气动弹性控制 | aeroelastic control |
气动液压试验控制台 | pneumatic hydraulic test console |
气动表面控制 | aero surface control |
气动阻尼复位控制 | damped aerodynamic righting attitude control |
气动除冰系统控制器 | pneumatic deicing system controller |
气化腐蚀抑制剂 | vaporized corrosion inhibitor |
气压制动器 | pneumatic actuator |
气压低空控制系统 | barometric low altitude control system (无人驾驶飞机上用的) |
气压式喷管控制 | pneumatic nozzle control |
气压控制 | barometric control |
气流控制调节器和作动器 | airflow control regulator and actuator |
气流控制阀 | flow control valve |
气源控制台 | control table of pressure gas |
气象雷达控制板 | weather radar control panel |
演习控制组 | exercise control unit |
演练控制分队 | exercise control unit |
爆破控制技术 | exposure control technique |
研制任务大纲工程指令 | development job outline engineering order |
研制信息管理系统 | development information management system |
研制发放指令 | development release order |
研制和试验 | development and test |
研制基线 | development baseline |
研制工作指令 | development work order |
研制工作请求 | development work request |
研制工程 | development engineering |
研制工程作业 | development engineering operations |
研制工程检验 | development engineering inspection |
研制性高速水翼艇 | development fast hydrofoil |
研制成本 | development cost |
研制成本计划 | development cost plan |
研制控制图 | development control drawing |
研制方案 | development scheme |
研制方法 | development method |
研制更改控制 | development change control |
研制材料成本报告系统 | development material cost reporting system |
研制构型 | development configuration |
研制构型管理委员会 | development configuration management board |
研制构型设计审查 | develop configuration design review |
研制概念文件 | development concept paper |
研制测试物品 | development test article |
研制的仪器 | development instrumentation |
研制的发动机 | development motor |
研制的发动机 | development engine |
研制签字批准 | development signature approval |
研制组合测试组件 | development joint test assembly |
研制组合测试装置 | development joint test unit |
研制网络图 | development network drawing |
研制联络工程师 | development liaison engineer |
研制规划 | development programme |
研制计算机的 | computer-oriented |
研制试飞 | development test flight |
研制试验 | development test (初样阶段的) |
研制试验仪表 | development test instrumentation |
研制试验仪表配套件 | development test instrumentation kit |
研制、试验和任务作业 | development, test and mission operations |
研制、试验和任务支援 | development, test and mission support |
研制试验和工程 | development test and engineering |
研制、试验和评估 | development, test and evaluation |
研制试验和鉴定 | development test and evaluation |
研制试验导弹 | development test missile |
研制试验/操作试验 | development test, operational test |
研制试验生产零件要求 | development test production parts requirement |
研制试验程序 | development test procedure |
研制试验结果 | development test results |
研制试验要求文件 | development test requirement document |
研制试验计划 | development test plan |
研制试验飞行器 | development test vehicle |
研制费用 | development cost (成本) |
研制部门 | engineering |
研制零件的安装和拆除 | installation and removal of developmental parts |
研制飞机 | development aircraft |
研制飞行 | development flight |
研制飞行仪表 | development flight instrumentation |
程序中断控制 | program interrupt control |
程序中断控制器 | program interrupt controller |
程序信息控制和检索系统 | program information control and retrieval system |
程序动作控制指令 | program action directive |
程序块综合区控制器 | integral block controller |
程序审査控制委员会 | program review control board |
程序控制机构 | sequence control |
程序控制中心 | program control center |
程序控制台 | program console |
程序控制报告 | program control report |
程序控制指示器数据处理器 | programmable indicator data processor |
程序控制指示器数据处理器 | programmable indicator data-processor |
程序控制文件 | process control file |
程序控制文件 | program control document |
程序控制照明 | lighted under program control |
程序控制程序块 | program control block |
程序控制装置 | program control unit |
程序控制计划 | programme control plan |
程序控制输人 | program control input |
程序数字控制飞行轨迹 | programmed numerical path |
程序数字自动控制 | programmed digital automatic control |
程序更改控制系统 | program change control system |
程序研制备忘录 | program development memorandum |
程序研制设施 | program development facility |
程序计划和控制自动数据系统 | program planning and control automated data system |
程序输人-输出控制器 | programmed input/output controller |
程序逻辑控制 | program logical control |
程序逻辑控制器 | program logical controller |
编制与装备一览表 | table of organization and equipment |
编制人员 | complement |
编制人数 | complement |
编制及装备一览表 | table of organization and equipment |
编制时间表 | scheduling |
编制武器 | active weapon |
编制物 | braid |
编制的 | braided |
编制表 | organization table |
编制设备清单 | organizational equipment list |
编制进度表 | scheduling |
编号制度 | number regime |
编码开关装置控制器 | coded switch set controller |
编程计划和控制 | programmed planning and control |
编译程序用编制程序 | compiler generator |
老龄飞机防腐和控制文件 | aging airplane corrosion prevention and control document |
老龄飞机防腐和控制程序 | aging airplane corrosion prevention and control program |
耐热合金制落锤模 | hammer die-inconel |
脉冲宽度增益控制 | pulse width gain control |
脉冲宽度调制变换器 | pulse width modulation inverter |
客脉冲宽度调制器 | pulse width modulator |
脉冲宽度调制器 | pulse length modulator |
脉冲宽度调制遥测 | pulse duration modulation telemetering |
脉冲宽度载波调制 | pulse width with carrier modulation |
脉冲幅度调制器 | pulse width modulator |
脉冲数字调制 | pulse digital modulation |
脉冲模拟调制 | pulse analog modulation |
脉冲调制装置 | pulse modulation unit |
脉冲调制解调器 | pulse width modulation |
脉冲调制遥感 | impulse modulated telemetering |
脉冲频率调制 | frequency modulation on the pulse |
脉冲频率调制 | pulse-frequency modulation |
脉码调制遥测系统 | pulse code modulation telemetry |
脉长调制 | pulse-length modulation |
信号调制 | modulate |
调制和切断阀 | modulating and shutoff valve |
PSK 调制器 | PSK modulator (实现相移键控调制的单元) |
调制器-反调制器 | modulator demodulator |
调制器-解调器 | modulator demodulator |
调制型真空计 | modulator vacuum gauge |
调制度 | percentage modulation |
调制开关 | modulation switch |
调制控制 | modulating control |
调制掺杂场效晶体管 | modulation-doped field effect transistor |
调制掺杂场效晶体管 | modulation doped field effect transistor |
调制的脉冲放大器 | modulated pulse amplifier |
调制腔 | buncher |
调制-解调 | modulate demodulate |
调制-解调 | modulation demodulation |
调制解调 | modulation-demodulation |
调制解调器 | modem moderator-demodulator |
调制解调器处理组件 | modem processor unit |
调制载波 | modified carrier wave |
调光器控制装置 | dimmer control unit |
调压活门控制器 | pressure regulating valve controller |
调节控制手柄 | adjustment control handle |
谐振器控制的微波源 | resonator controlled microwave source |
谐波抑制 | harmonic balance |
客踏板运行限制器 | pedal travel limiting unit |
适应控制器 | adaptive controller |
适应机制 | adaptation mechanism |
适应环境控制系统 | adaptation controlled environment system |
适应评价控制 | adaptive critic |
适航性限制 | airworthiness limitation |
适航性限制条款 | airworthiness limitation item |
适航性限制项目 | airworthiness limitation item |
适航限制区域 | airworthiness limitation section |
适航限制项目 | airworthiness limitation item |
适航限制项目 | airworthiness limitation items |
适配器控制约束 | adaptive control constraint |
适配控制 | adapter control |
逆升压式空气循环制冷系统 | reversed bootstrap air-cycle refrigeration system |
逆电压控制的半导体开关 | dynistor |
选择器控制盒 | selector control box |
选择的控制高度 | altitude hold selected |
透镜调制振荡器 | lens modulated oscillator |
途中空中交通管制勤务 | enroute traffic control service |
销轴控制装置 | pin control unit |
锉刀光制 | file finish |
阀门及配件制造工业标准化协会美 | Manufacturers Standardization Society of the Valve and Fittings Industry |
阀门开度控制 | valve position control |
阈极限值短期暴露限制 | threshold limit value—short term exposure limit |
需求研制计划 | requirements development plan |