Sign in | English | Terms of Use
DictionaryForumContacts

   Chinese ⇄
Terms containing 凹模 | all forms | in specified order only
SubjectChineseEnglish
met.上凹锻模top swage
auto.上凹锻模bottom swage
tech.下凹锻模bottom swage
oil侧凹模re-entrant mold
tech.侧凹模reentrant mold
auto.凸凹模punch-die
tech.凸凹模punch die
met.凹凸冲模offset die
tech.凹凸浮雕模型embossed pattern
met.凹压模固定压模cover die
tech.凹压模cover die
mech.eng.凹坑压模dimple die
plast.凹框模recessed mould
tech.凹槽模chase form
tech.凹模cavity block
tech.凹模female die
tech.凹模female mold
tech.凹模mold cavity
tech.凹模mould cavity
auto.凹模die
oil凹模cavity die
plast.凹模negative die
plast.凹模female form
el.mach.凹模bottom die
met.凹模concave die
met.凹模cavity of die
auto.凹模bed die
tech.凹模lower mould half
tech.凹模lower mold half
tech.凹模female mould
gen.凹模die-plate
tech.凹模上面高度die level
tech.凹模厚度die thickness
tech.凹模台肩角度shoulder angle
tech.凹模固定板die holder
tech.凹模固定板die block
auto.凹模圆角半径die radius
tech.凹模圆角半径die profile radius
tech.凹模拉入的圆角部分bell of die
met.凹模拉延concave die drawing
tech.凹模支撑圈die backer
gen.凹模斜角draft
gen.锻焊凹模模子die
gen.便于零件落下的凹模洞斜角draught
tech.凹模铣刀die sinking cutter
tech.凹模铣床die sinking milling machine
tech.凹模镶块die plate insert
tech.凹模顶杆die-pin
plast.凹腔模具reentrant mould
plast.凹腔模具reentrant mold
telecom.凹陷型包层单模光纤depressed cladding single-mode fiber
space凹陷破坏模式indentation failure mode
tech.凿缝凹模staking die
auto.分式凹模combined heading die
met.压力机凹模press die
arts.如今的擦擦意为一种凹形模具，用来压制出成型的泥塑浮雕Today's tsha-tsha is intended as a concave mould, used to suppress the moulding clay reliefs
tech.对向凹模冲裁blanking with opposed dies
tech.嵌入式圆形凹模固定板button die retainer
tech.开凹口模notching dies
auto.开式凹模open heading die
avia.弹性凹模深压延flexible die deep drawing
gen.悬臂轴状凹模horn
tech.拉延凹模圆角半径drawing edge radius
tech.拉延凹模圆角半径draw edge radius
met.压 拉延凹模圈draw ring
tech.整体式凹模solid die
polygr.明胶凹版模gelatin gravure
tech.最佳挤压凹模角optimum extrusion angle of die
tech.有凹槽的模板fluted formwork
met.【压】 模具凹槽recess of die
met.模具凹槽recess of die
polygr.模压凹凸印die embossing
tech.橡胶凹模成型rubber pad forming
gen.用凹模铸成的模型ectypum
tech.组合式凹模combined die
auto.组合式凹模die assembly
tech.组合式凹模combination die
auto.镦制凹模heading die
shipb.镶衬套凹模bushed die

Get short URL