DictionaryForumContacts

   Chinese
Terms containing 减径 | all forms | in specified order only
SubjectChineseEnglish
met.三辊式张力减径three-roll stretch reducer
gen.二次减径螺钉镦锻法dexbolt method
gen.使减小直径swedge
met.减径cold reduction
tech.减径cold reduced
met.减径cold-reducing mill
met.减径cold-sinking mill
met.减径cold-reduction mill (① Inland has invested considerable money in the last few years. Much of it was spent on a joint venture with Nippon Steel which included installing a cold-reduction mill and two galvanizing lines at New Carlisle, Indiana. 近年来内陆钢公司已投人大量资金,其中的大部分投人到与日本新日铁钢公司的合资项目上;该项目包括在印第安纳州新卡莱尔建造一台冷轧机和两条镀锌生产线。② The plant included a six-high, cold-reduction mill for the production of cold-rolled sheets, as well as a galvanizing line. 这座钢厂的设备包括一台生产冷轧薄板的六辊冷轧机和一条镀锌生产线。)
met.减径cold-sinking mill
gen.管子减径cold-reduced
dril.减小外径的钻铤turn-down drill collar
gen.减小直径waist
archit.减少直径waist
roll.减径sinking
roll.减径sink
roll.减径closing
tech.管材定径时的减径sizing reduction
met.减径closing (在芯棒上锻造空心零件,使直径减少)
met.减径sizing reduction
gen.减径reduce
auto.拉钢丝减径drafting
met.管材减径sink
plast.减径reduce
met.管材减径时的减径sizing reduction (量)
gen.拉钢丝减径draughting
tech.减径一定径机reducing sizing mill
met.减径孔型sinking pass (管材的)
met.减径孔型reducing pass
met.减径-定径机reducing sizing mill
met.减径-定径机sinking-sizing mill
met.减径定径机sinking-sizing mill
steel.减径-定径机sinking sizing mill
met.减径定径机组reducing-sizing block
met.减径拉伸hollow sinking
met.减径拉拔hollow sinking
met.减径拉模reducing die
gen.减径拔管sinking
tech.减径拨管sinking
tech.减径挤压ironing
avia.减径挤压加工ironing
met.减径reducer
roll.减径reducer
met. 减径reducing mill
met.减径sinking mill
met. 减径sinking mill
met.减径reducing mill
oil减径法兰reducing flange
met.减径reduction in diameter
met.减径sinking ratio
met.减径reducing ratio
tech.减径矫治法minimizing diameter therapy
tech.减径软管管套reducing hose coupler
tech.减径sizing reduction
tech.多径缩减因子multipath reduction factor
el.多路径缩减因子multipath reduction factor
tech.小半径曲线坡度折减compensation of sharp curve
met.张力减径stretch reducing (管材的)
met.张力减径stretch reduction
tech.钢管的张力减径stretch reducing
met.张力减径stretch-reducing mill (管材的)
steel.张力减径tension reducing machine
met.张力减径stretch reducer (管材的)
met.张力减径tension reducing mill (管材的)
steel.张力减径stretch reducing mills
ecol.径流减速系数runoff retardance coefficient
met.拉力减径stretch reduction
met.拉力减径stretch reducing
met.拉力减径tube stretch reducing mill
met.拉力减径stretch-reducing mill
met.拉力减径stretch reducer
met.斜轧穿孔张力减径cross piercing sinking
met.无张力减径nonstretch reducing
tech.柱径渐减的柱样板diminishing rule
tech.柱径渐减的柱样板diminished rule
el.柱径渐减的柱身diminished shaft of column
tech.柱径渐减的柱身diminished shaft
gen.用光圈把透镜的孔径减小diaphragm
gen.用光圈把透镜的孔径减小diafragm
dril.直径减小的swedged
oil直径分段减小的套管柱tapered casing string
oil直径分段减小的油管柱tapered tubing
oil直径分段减小的油管柱graduated tubing
tech.直径缩减率percentage reduction of diameter
gen.磨损或减小齿轮直径fraze
steel.空心坯减径shell-reducing mill
met.管子冷减径cold reduction of tubes
met.管子冷减径cold-reduction of tube
met.管子冷减径cold reduction of tube
met.管材减径tube reducer
met.管材减径tube-reducing machine
met.管材减径pipe-reducing machine
met.管材减径tube-reducing mill
steel.管材减径tube reducing mill
met.管材张力减径pipe tension reducing mill
met.管材张力减径tube stretch reducing mill
met.罗克内尔式大口径管材壁厚减薄用轧机Roeckner tube rolling mill
met.荒管减径shell reducing mill
met.荒管减径hollow shell reducer
ecol.补充和消减途径process of digestion and attenuation
auto.活塞裙部直径减小skirt collapse
met. 跨鞍式减径定径机straddle-type mill (轧辊的支点位于两侧)
met.跨鞍式减径-定径机straddle type mill
telecom.路径衰减path attenuation
avia.路径衰减修正path attenuation correction
avia.路径衰减校准path attenuation correction
avia.路径衰减补偿path attenuation compensation
tech.速度递减求径法velocity method duct sizing
met.钢管张力减径tube stretcher
met.钢管拉力减径tube stretch reducing mill