Sign in | English | Terms of Use
DictionaryForumContacts

   Chinese ⇄
Terms for subject Metallurgy containing 冲孔 | all forms | in specified order only
ChineseEnglish
上斜孔缓冲板baffle-board with up gate holes (中间包内的)
修整冲孔drifting
冲出的孔punched hole
冲孔piercing
冲孔punch (【技】冲压：在压力机的模具上将金属板加工成各种零件的金属塑性加工方法，通常采用冲压。室温下塑性差的材料，可采用热冲压。板材冲压生产效率高,易于实现机械化、自动化，适于大批量生产。)
冲孔perforating
冲孔stroke
冲孔hole punching
冲孔冲头slugger punch
冲孔冲头piercing punch
冲孔凸模最小允许尺寸permissible minimum size of piercing punch
冲孔压力机piercing machine
冲孔器nail set
冲孔器hollow punch
冲孔应力punching stress
冲孔废料punchings
冲孔机piercing machine
冲孔机drift chisel
冲孔板punch plate
冲孔板筛punch plate type screen
冲孔柱塞piercer plunger
冲孔标记centre-punch mark
冲孔模piercing die
冲孔模punching die
冲孔模perforating die
冲孔管perforated pipe
冲孔芯棒piercing mandrel
冲孔试验punching test
冲孔阳模piercing punch
夏氏钥孔形缺口冲击试样Charpy keyhole specimen
夏氏钥孔形缺口冲击试验keyhole Charpy test
夏氏钥孔形缺口冲击试验key-hole Charpy test
【连】 多孔缓冲板multiple-hole baffle (【技】安装在中间包内，常和挡渣墙配合使用以调整中间包内的钢水流动，促使夹杂物上浮。)
大孔冲头quill punch
带孔缓冲板baffle with holes (The results for the "steady state" RTD trials show that the plug flow volume fraction decreases compared to when a baffle with holes is used. "稳态"停留时间分布实验结果表明，与使用带孔缓冲板时相比，活塞流体积分数降低了。)
平板冲孔机plate-punching machine
悬臂式冲孔模horn-type piercing die
椭圆形冲孔钢板oblong-punched plate
椭圆形孔冲模板oblong-punched plate
爆炸冲孔explosive perforation
落料冲孔复合模compound blank and pierce die
钥孔形冲击试样key-hole specimen
锻工用冲孔器smith's drift
长方形冲孔钢板oblong-punched plate
预先冲孔prepiercing

Get short URL