双浇结晶器(The center divider in the twin molds is fixed while changes in mold widths are carried out by moving the opposing narrow plates. 双联结晶器的中间隔板是固定的,而结晶器的变宽是通过移动相对的窄面板来实现的。)
二辊连铸机(【技】双辊连铸机的主体设备为两个异向转动的水冷辊,辊端设置耐火材料坝或电磁坝,将钢水约束在两辊之间。随着辊子的转动,钢水迅速在两辊之间凝固成形。: The capacity of twin-roll caster increases with the reduction of cast strip thickness because the contact length from the meniscus to the "kissing point" remains unchanged. 由于从金属弯月面到"吻点"的接触长度保持不变,因此双辊连铸机的生产能力随浇铸带钢厚度减薄而增加。(此处"吻点"指的是双辊连铸机两个旋转辊表面距离最近的点))
双辊连铸法(Casting powders are not required due to the absence of relative movement between shell and mold for twin-roll process. 由于双辊连铸法不存在铸坯壳和结晶器之间的相对移动,因而不需要连铸保护渣。)
双辊连铸法(Casting powders are not required due to the absence of relative movement between shell and mold for twin-roll process. 由于双辊连铸法不存在铸坯壳和结晶器之间的相对移动,因而不需要连铸保护渣。)
双炉壳直流电弧炉(The expansion program includes a new 150-tonne twin-shell dc electric arc furnace, ladle metallurgy furnace, single-strand continuous slab caster (slabs 5- in. thick, 35.4 to 102. 4-in wide) and walking beam continuous heating furnace. 该扩建规划包括新建一座150 t 双壳直流电弧炉,一座钢包冶金炉,一台单流板坯连铸机(板坯厚5 in, 宽35.4 - 102. 4in) 和一座步进梁式连续加热炉。)
板坯双浇(【技】通过在一个板坯结晶器内插人中间隔板的方法同时浇铸两流较窄板坯的工艺。: When twin-slab casting, the mold center divider has a fixed taper which remains constant during width changes. 板坯双浇时,结晶器中间隔板有一个固定锥度。在变宽操作期间,该锥度保持不变。)
双联板坯连铸结晶器(Mathematical modeling of melt flow and heat transfer in the twin slab casting molds of No.2 continuous casting machine has been completed. 现已完成了 2号连铸机板坯双浇结晶器内熔体流动和传热的数学模拟。)
双流板坯连铸机(A contract for a twin-strand continuous slab casting machine was awarded by the AB Iron and Steel Company to Mesta Engineering Company. AB 钢铁公司已将一份双流板坯连铸机合同授予 Mesta 工程公司。)