Sign in | English | Terms of Use
DictionaryForumContacts

   English ⇄
Terms containing mould | all forms | exact matches only
SubjectEnglishChinese
tech.air set mould自硬型
tech.aluminium mould铝模
tech.aluminium mould paint铸铝件砂型涂料
tech.aluminium mould plate铝模板
tech.aluminium permanent mould alloy硬模铝合金
tech.aluminium permanent mould casting alloy硬模铸造铝合金
tech.Are there any weak steel areas on the mould?模具有没有薄钢位？
tech.assembling mould装配铸型
tech.automatic mould自动塑模
tech.automatic mould自动模
tech.automatic mould自动压模
tech.baked mould干型
tech.bar mould多穴压模
tech.belt mould board带式犁壁
tech.bending mould弯板模
tech.bending mould弯曲模具
tech.bending mould弯曲造型
tech.big-end-up mould上大下小钢锭模
tech.biscuit mould素坯模具
tech.blank mould初模
tech.blank mould坯模
tech.blank mould初型模
tech.blow mould吹制模具
tech.blowing mould吹模
tech.bolection mould凸式线脚
tech.bolection mould突线条
tech.bolection mould盖缝线脚
tech.bolection mould凸出嵌线饰
tech.bolection mould凸嵌线
tech.bolection mould镜框式线脚
tech.book mould分体模
tech.book mould叠箱铸型
tech.bottom-pour mould底浇铸型
tech.box mould有箱造
tech.box mould箱式翻砂模
tech.box mould箱式造型
tech.brace mould葱拱样板
gen.breathe a mould开模排〔放〕气
tech.brick mould砖线脚
tech.brick mould砖砌线脚
tech.brick mould砖模
tech.bronze mould青铜模
tech.bronze mould青铜造型
tech.bronze mould青铜线脚
tech.bubble mould cooling膜泡塑模冷却
tech.bull metal mould大型的金属模子
tech.carbon dioxide silicate mould二氧化碳水玻璃砂型
tech.carbon mould碳质模型
tech.cardboard mould纸板模型
tech.casting mould注浆模
tech.casting mould铸模
med.casting mould铸型 (模)
tech.cavity-tile mould空心砖模
tech.cement mould水泥型
tech.centrifugal casting mould离心铸造铸型
tech.chamotte mould泥型
tech.channel mould槽模
tech.channel mould下水道盖板
tech.chilled cast iron mould board冷硬铸铁犁壁
tech.close mould封闭铸型
tech.closed mould闭式压模
tech.closed mould封闭式模具
tech.closer mould封层砖样板
tech.cold mould表面冷斑
tech.cold mould arc furnace冷模电弧炉
tech.cold-mould arc melting水冷坩埚电弧熔炼
tech.cold-mould furnace自耗电极真空电弧炉
tech.cold punching mould冷冲模
tech.cold runner mould冷流道模
tech.collapsible mould分片模
tech.collapsible mould分室模
biol.common green mould of citrus柑橘绿霉病 (Penicillium digitatum Sacc.)
gen.compo-mould混成砂铸型由尖角硅砂、耐火砖碎屑、黏土制成，高温强度高
tech.corrugated mould波形铸模
tech.coupled standing mould成对立模 (法)
tech.covered floor mould盖箱地面铸型
shipb.cradle mould样箱
tech.crown mould钻头压模
tech.crown mould钻头造型
tech.crush in a mould铸型的垮损
tech.crush in a mould塌箱
tech.cut-off mould溢出式铸塑模
tech.degassing mould排气塑模
tech.disassemble mould开模
tech.double cavity mould双联模
tech.double cavity mould双穴模
tech.double mould复合式线脚
tech.double mould-broad ridging plough双壁起垄犁
tech.drape mould罩布模具
tech.draw mould薄壁模 (子)
tech.draw mould铸塑模
tech.drawn mould铸塑模
refrig.drip mould滴水槽
tech.dry sand mould干砂型
tech.dual mould复式线脚
tech.dual mould双模壳
tech.ductility test mould延性试验用模 (沥青材料)
tech.edging mould边缘装饰线脚
tech.edging mould边缘线饰
tech.electrical pole mould hanger电杆模型吊架
tech.electroformed mould电化成型模
tech.electroformed mould电铸模
tech.Erical mould挤压锭模
tech.Erical mould可压锭模
tech.expendable mould一次铸模
tech.external mould外模
tech.external mould lubricant外施脱模剂
tech.face mould划线模板
tech.face mould样板
tech.face mould面模
tech.face mould表面形状检验仪
tech.face mould面样模板
tech.face unit mould划线样板
tech.face unit mould面模
tech.face unit mould母模
tech.falling mould弯曲形式
tech.falling mould曲型线条
tech.falling mould深度模式 (楼梯扶手弯曲部分)
tech.family mould多腔铸型
tech.family mould一模多铸铸型
tech.female mould凹模
tech.fireclay mould耐火黏土模
tech.flash mould溢式模具
tech.flash mould溢出式铸塑模
tech.flash mould溢流模
tech.flash mould平线脚
tech.flash mould敞开式模具
tech.flash mould溢式压塑模
tech.floor mould地坑铸型
tech.floor mould地铸模
tech.folding mould折叠式模板
tech.foundry mould铸模
tech.foundry mould铸型
tech.frame mould肋骨样板
tech.frame mould构架模型
tech.front mould前模
biol.fruit mould灰腐病 (Sclerotinia fuckeliana)
gen.full-mould实型〔模〕的
biol.fusarium mould麦类红色雪腐病 (Fusarium nivale Ces.)
tech.gang mould联模
tech.gang mould成组模 (板)
tech.gang mould连模
tech.gang mould多巢模板
tech.garden mould菜园土
tech.garden mould园土
tech.gathering mould吸料模
tech.gelatine mould明胶石膏模
gen.get in the mould垫平铸型准备浇注
tech.glass fiber mould玻璃纤维模 (型)
tech.glass footed stem mould高脚杯梃模
tech.glass mould玻璃模具
tech.glass mould玻璃铸型
tech.glass mould diode玻璃模二极管
tech.graphite mould石墨型
tech.graphite mould石墨模 (具)
tech.graphite mould department石墨模具车间
tech.grass mould腐草土
tech.grease-graphite mould润滑脂石墨混合物
desert.green mould绿霉
desert.green mould青霉病
desert.green mould青霉
biol.grey mould of lupine羽扇豆灰霉病 (Botrytis cinerea Pers)
tech.ground mould倒置隧道模型
tech.ground mould地坑造型
tech.ground mould地面铸型
tech.ground mould堆土木模
tech.ground mould土堤堆土模
tech.ground mould地模
tech.ground mould排水沟模型
tech.gypsum mould石膏外模
tech.gypsum mould石膏模 (型)
tech.half of mould半模
tech.high-frequency electrically heated mould高频加热模
tech.highly effective anti-mould高效防霉剂
biol.hop mould啤酒花白粉病 (Sphaerotheca humuli (DC.) Burr.)
tech.horse mould灰线模具
tech.horse mould挑檐抹灰样板
tech.horse mould砖坯模
gen.hot-mould热模塑
tech.hump mould压坯用阳模
tech.hump mould上凸模具
tech.hump mould压片用阳模
refrig.ice mould冰模
refrig.ice mould flame冰桶架
tech.individual mould method预应力混凝土单独模板施工法
avia.injection mould注塑模 (用于加热和/或加压的方法塑制如玻璃纤维加强树脂、橡胶、聚四氟乙烯等材料的拼合模)
shipb.inspection by mould bar样条法检验
shipb.inspection by mould bar样条法检查
shipb.inspection of mould bed胎架检查
tech.insulating mould coating隔热涂料
tech.interchangeable cavity mould可换腔模具
tech.investment mould失蜡铸型
steel.iron mould钢锭模
tech.joint mould型模
tech.joint mould预制灰质饰件的模板
tech.joint mould成形模板
tech.kerb mould路缘模子
tech.kerb mould路缘模板
tech.lead pourer's mould铅浇注模
tech.leaf mould腐殖叶
tech.leaf mould腐叶色
tech.leaf mould腐殖土
tech.leaf mould腐叶土
tech.library negative mould馆藏立体地图印膜
tech.light-gauge metal mould薄钢模板
tech.light-gauge metal mould轻金属模板
tech.lip mould唇瓣装饰
tech.lip mould凸缘线脚
tech.load mould负荷模
tech.loam mould麻泥型
tech.loam mould黏土砂泥型
tech.loam mould泥模
tech.loam mould泥塑
tech.loam mould黏土铸造 (物)
tech.loam mould烂泥型
tech.loam sand mould黏土砂泥型
tech.loose mould可拆玻璃线脚
tech.loose mould可卸式压模
tech.loose-plate transfer mould活板式传递塑模
tech.male mould上模
tech.Many common parts and common mould base parts are used while the designer are designing powder metallurgy die在进行粉末冶金模具设计时经常会用到大量的通用零件和通用模架
shipb.marking off from cradle mould样箱号料
shipb.marking off from mould bar样棒号料
tech.master mould原模
tech.master mould原版
tech.master mould一次过渡模
tech.matched mould合模
tech.matched-mould forming对模模压成型
gen.mend the mould补〔修〕型
tech.metal mould金属模型
tech.metal mould金属铸模
tech.metal mould金属模子
tech.metal mould casting硬模铸造
tech.metal mould panel金属定型模板
tech.metal mould panel金属定型模板
ecol.micron wood fiber product by mould pressing微米木纤维模压制品
tech.mismatch in mould铸型错箱
tech.model mould原始模型
tech.modern mould and core making process现代型模型及型芯制造法
shipb.mould bar样棒
biol.mould beetles隐食甲科 (Cryptophagidae)
tech.mould blacking砂型涂料
steel.mould brick锭模砖
tech.mould buggy钢锭模车
tech.mould coating material钢锭模涂料
tech.mould cope上半型
gen.mould-cover腐殖质层
avia.mould dimension铸型尺寸
gen.mould-drying模型干燥
gen.mould-drying烘模
tech.mould efficiency模塑效率
tech.mould-encased curing密封模内养护
tech.mould face铸型表面
tech.mould facing铸型涂料
desert.mould fungus霉菌
avia.mould growth霉菌生长
tech.mould hanger模具悬杆
tech.mould hardness铸型硬度
tech.mould hardness tester砂型硬度计
tech.mould hardness tester铸头硬度试验器
tech.mould-hinge pin模型铰链销
tech.mould hold time闭模时间
gen.mould M into把M铸〔塑，模压〕成N (N)
gen.mould line型ìì
avia.mould loft模线
steel.mould lubricating station结晶器润滑站
tech.mould manufacture模型制造
tech.mould mark模缝线
tech.mould mark模具痕迹
tech.mould mark模缝条痕
tech.mould mark制模工
gen.mould on按…的模子做 (upon)
tech.mould plate抹灰用线脚模板
tech.mould plate模型板
tech.mould plate线脚模板
steel.mould preparation stand锭模准备平台
steel.mould preparation stand整模平台
tech.mould release模型润滑剂
tech.mould release分型粉
tech.mould release分离剂
tech.mould release脱模 (剂)
tech.mould release离型剂
tech.mould release防黏剂
tech.mould release隔离剂
tech.mould release agent脱模剂
tech.mould release agent下模剂
tech.mould release agent松模剂
tech.mould release oil模型油
tech.mould release oil脱模油
tech.mould scale模鳞
tech.mould seam合缝线印
tech.mould seam模缝
tech.mould spacer block模具定位块
tech.mould transfer铸型输送器
tech.mould turnover翻箱
tech.mould turnover rate模具周转率
tech.mould vibration模具振动
tech.mould wall铸型壁
tech.multicell battery mould多格成组模 (预制混凝土用)
tech.multiple cavity mould多腔模
tech.multiple cavity mould多巢模
tech.multiple cavity mould多型腔铸型
tech.multiple mould多件模
tech.multiple mould多模
tech.multiple mould多次模塑法
tech.multiple mould多件石膏模
gen.multiple-mould多次模塑法
gen.multiple-mould叠箱铸型
gen.multiple-mould多模〔型〕
tech.multiple mould machine多模成型机
tech.multiple part mould多箱铸型
tech.multiple-part mould多箱铸型
tech.open bottom mould底开式钢锭模
tech.open mould敞口铸型
tech.open mould明浇铸型
tech.open pit mould敞开式模具
tech.original mould原型
tech.ornamental mould装饰造型
tech.ornamental mould艺术造型
tech.outer mould vibration method外模振动法
tech.overflow mould溢流〔挤压〕模
tech.overflow mould溢流铸模
tech.oxide-ceramic shell mould氧化物陶瓷型壳
tech.Paint one color at a time onto the surface of the mould and allow it to harden before moving on to the next color在模具表面着一种颜色，并让其在着下一种颜色前变硬
tech.panel mould墙板模
tech.panel mould镶模板
tech.panel mould间壁模
tech.panel mould镶板模
gen.papier-maché mould纸型〔版〕
tech.Parison mould初型模
tech.partly open mould半敞开式模具
tech.paste mould衬碳模
tech.paste mould machine薄壁吹泡机
tech.paste mould ware衬碳模成型的制品
tech.pattern mould图案塑膜
tech.pattern mould母模
tech.pattern mould压制图案模型
gen.pennanent mould耐用铸模
tech.pennanent mould硬 〔永久〕模
gen.pennanent mould永久〔金属〕铸型
tech.permanent mould永久性铸模
tech.permanent-mould casting硬模铸造
tech.plastic mould塑料模
tech.plastic mould塑料模板
tech.plastic mould塑料模型
tech.plastic mould cooling system塑料模制冷却系统
tech.plastic mould for concrete混凝土塑料模型
tech.3-plate mould三板模 guided ejection
tech.plywood mould胶合板模板
tech.porous mould多孔模型
tech.porous mould多孔塑模
tech.post mould柱的模板 (混凝土)
tech.pot mould空心砖模
tech.pouring in vertically clamped moulds垂直浇注
tech.powder in mould coating模内粉末涂覆
tech.prism mould棱柱试模
tech.prism test mould棱柱体试模
tech.quadrant mould四开木压条
tech.radius kerb mould转弯处路缘石的模板
tech.rampant mould concrete连续模捣混凝土
tech.reproduced model mould实物模铸型
tech.reproduced model mould实物造型
tech.reverse mould倒模
tech.reverse mould倒型
tech.ring mould瓶颈模
tech.ring-shaped mould环形铸模
refrig.row of moulds冰模排
tech.rubber mould橡胶皮模
ecol.sand-mould casting砂型铸件
tech.sealing of a mould铸型密封
tech.section mould截面形状和尺寸样板石膏制品的模具
tech.section mould型模
tech.section mould型煤
tech.section mould成型模
tech.sectional mould拼合型
tech.sectional mould镶合砂型
tech.seizing of mould模型卡紧
tech.self-curing sand mould自硬砂型
tech.semi-automatic mould半自动塑模
tech.semi-chilled mould casting半金属型铸造
tech.semi-chilled mould casting半冷模铸造
tech.semi-closed top mould瓶口锭模
tech.semi-closed top mould半封顶锭模
tech.semi-permanent mould半永久型
tech.semi-permanent mould半金属型
tech.semi-permanent mould半永久性模
tech.semi-positive mould半溢式模具
tech.semi-positive mould半密闭式模具
tech.semi-positive mould半溢式塑模
tech.shell mould原版
gen.shell-mould用壳型铸造法制造的壳模
tech.shell mould machine壳形造形机
tech.shiftable mould-board可拆换的刀片
tech.ship's mould line船体型线
tech.single cavity mould单穴模
tech.single cavity mould单腔模具
tech.single cavity mould整体铸型
tech.single gate mould单浇口模
tech.single impression mould单穴模
tech.single mould单件模型
tech.single mould board plough单壁犁
tech.single mould board plow单臂犁
tech.single mould press单模压机
tech.single split mould组合模 (具)
tech.slab mould板模
tech.sleeper mould轨枕盒
tech.sleeper steel mould轨枕钢模
biol.slime mould黏菌 (Myxomycetes)
gen.snapflask mould脱箱造型
biol.snow mould雪腐病 (Fusarium nivale (Fr.)Ces.; Fusarium graminicola (Berk et Br.) Synder et Hansen; Calonectria gramnicola Wollenw.)
tech.soft-center steel mould board软心钢犁壁
tech.spinning mould纺丝模具
tech.spinning mould离心铸型
tech.spinning mould纺丝模
tech.spiral mould cooling铸型螺旋孔冷却
tech.spiral-cavity mould螺线腔模
tech.split ingot mould对开钢锭模
tech.split mould拼合铸模
tech.split mould对开模
tech.split mould分件模
tech.split mould组合模 (具)
tech.split-cube mould对开模
tech.split-ring mould瓣合模
tech.split-ring mould组合模 (具)
tech.spun lighting column mould旋制灯柱模子
tech.spun lighting column mould旋制电杆模子
tech.spun pile mould旋制桩模
tech.standard briquette mould标准水泥试块模壳
tech.standard briquette mould标准水泥试块模子
tech.standard mould标准模子
tech.standard mould标准模型
tech.standard mould board标准模板
tech.standard steel ingot mould标准钢锭模
tech.steam-heated mould蒸汽加热模
tech.steam-jacketed mould蒸汽
tech.steel mould钢模 (板)
tech.steel mould钢模具
tech.steel mould for electrical pole电杆钢模
tech.stressing mould张拉模具
tech.stressing mould预加应力模具
tech.stuck mould粘贴线条
tech.stuck mould粘贴线脚
tech.suction mould抽吸成型
tech.suction mould真空铸造
tech.sunk fillet mould埋嵌线条饰
tech.sunk fillet mould平条埋嵌线饰
tech.sunk fillet mould埋嵌条饰
shipb.survey by mould bar样条法检验
shipb.survey of mould bed胎架检验
tech.swell of a mould胀沙
tech.tape of mould模型锥度
steel.taper in mould walls锭模壁斜度
tech.test beam mould试验梁模
tech.test cube mould立方体试模 (混凝土)
tech.test piece mould试件样模子
tech.test piece mould试件模具
tech.test sample mould试验样品模具
tech.test specimen mould试样模 (子)
gen.the casting process consists in pouring molten metals into moulds铸造过程在于把熔化了的金属浇注到铸模中去
tech.The moulds are made of cast iron这些模具是用铸铁做的
tech.thermite mould热剂模
tech.thermite mould铝热铸型
tech.tilt mould倾动铸型
tech.tilting mould翻转模板
tech.timber mould木模
biol.tomato leaf mould番茄叶霉病 (Cladosporium fulvum Cke.)
tech.tow-piece mould对开模
tech.transfer mould传递式模具
tech.travelling mould活动式模子
tech.travelling table mould移动式平台模板
tech.tray mould盘式模型
tech.tree mould树模
tech.turnover table mould翻台模架
tech.twin mould双模
tech.two-cavity mould双型腔铸型
tech.two-part mould两箱造型
tech.two-piece mould双件模
tech.upper mould上部模板
tech.variable-point-mould变点模型
desert.vegetable mould沼泽泥
soil.vegetable mould植被层
tech.verge mould山墙檐口线脚
tech.verge mould山墙檐边突瓦下的线脚
tech.vertical mould竖模
tech.vibrating mould振动模板
tech.vibrating mould振动模具
tech.watch-case mould表壳式压模
biol.water moulds藻菌植物 (Phycomycetes)
tech.water-cooled copper tube mould水冷管式铜坩埚
tech.water-cooled mould水冷模
tech.wax mould蜡铸模
gen.weighting of a mould加压重压铁
tech.wet blast mould cleaning喷湿砂洗模
biol.willow sooty mould柳煤病 (Apiosporium salicinum Kunze.)
tech.winged mould board装翼模板
tech.With the extensive use of plastics, injection moulds are used more and more widely随着塑料制品大量使用，注塑模的应用越来越广泛
tech.wooded mould木线脚 (饰)
tech.wooden mould木模 (型)
tech.working mould工作模型
tech.working mould工作模具
Showing first 500 phrases

Get short URL