English | Chinese |
C-I-L denitration process | C-I-L 公司脱氮工艺 |
Circle L | 塞克尔 L 镍铬钢 |
Circle L | 赛克尔L镍铬钢 |
D.L.M. Dwight-Lloyd-Me Wane process | D.L.M. 带式烧结机-电炉联合直接炼铁法 |
D.L.M. process Dwight-Lloyd-McWane | 带式烧结机-电炉联合直接炼铁法 |
D.L. Dwight-Lloyd machine D.L. | D.L.带式烧结机 |
D•A. L. Diffusion Alloys Ltd. process | 粉状固体填料化学热处理法 |
D•A. L. Diffusion Alloys Ltd. process | DAL 法 |
F.S.L. | F.S.L. 低碳不锈钢 |
hot-rolled L-sectional steel | 热轧 L 型钢 |
L.B.142 alloy | L.B.142 高锡铅基轴承合金 (10〜20Sn,12.5~15Sb, 63.5 〜 75Pb,0.2~1.5Cu) |
L-bar | 不等边角钢 |
L-beam | 角钢 |
L-beam | L 形钢梁 |
L-beam | 不等边角钢 【角铁】 |
L-beam | L形梁 |
L-D converter plant | 氧气顶吹转炉炼钢厂 |
L-D furnace | L-D 转炉 |
L-D furnace | BOF 转炉 |
L-D furnace | 氧气顶吹转炉 |
L-D plant | 氧气顶吹转炉车间 |
L-D plant | L-D 转炉车间 |
L-D process | L-D 炼钢法 (The L-D process is an abbreviation of Linz Düsen-verfahren,, or Linz lance process. It is however often suggested that the name was derived from the initials of two separate plants in Austria, at Linz and Donawitz. L-D 法是(德文)Linz Düsen-verfahren 的缩写,意即林茨喷枪法。然而也经常有人提出异议,认为这个名字取自奥地利的两个钢厂——林茨厂和多纳维兹厂名称的首字母。②The L-D process combines the low capital cost and high speed of operation of the Bessemer process with the high product quality of the open-hearth. L-D 炼钢法将贝塞麦炼钢法的投资费用低、生产速度快和平炉炼钢的产品质量高等优点集于一身。) |
L-D process | 氧气顶吹转炉炼钢法 |
L-D shop | L-D 转炉车间 |
L-D shop | 氧气顶吹转炉车间 |
L-D steelmaking capacity | L-D 炼钢生产能力 |
L-D steelmaking capacity | 氧气顶吹转炉炼钢生产能力 |
L-D steelmaking equipment | L-D 炼钢设备 |
L-D vac process | L-D 真空法 |
L-D vac process | 【钢】 顶吹真空法 |
L-D vessel | 顶吹氧气转炉 |
L-D vessel | L-D 转炉 (【参】 L-D vessel 和 L-D converter 虽在大部分场合都可以翻译成"氧气顶吹转炉",但在语义上存在差别。) |
L-D vessel | 【钢】 氧气顶吹转炉 |
L.D.K. process | L.D.K. 氧气转炉内高磷生铁块状石灰炼钢法 |
L.D.plant | D.转炉车间 |
L.D.plant | 氧气顶吹转炉车间 |
L-iron | 不等边角钢 |
L-iron | 不等边角铁 |
L-iron | 角钢 |
L.K.A.B. compression test | 【团】 L K.A.B. 抗压试验 (瑞典) |
L level | L 能级 |
L section steel | L 型钢 |
L section steel pile | L 型钢桩 |
L segregates | 锭边偏析 |
L-shaped iron | 不等边角钢 |
met-L-chek | 金属染色探裂法 |
Nikrothal L | 尼克罗塔尔L 镍铬合金 (75Ni, 17Cr,余量 Si 及 Mn) |
No.l manganese bronze | 1 号铸造锰青铜 (58Cu, 1Sn, 0.25Mn, 1.25Al, 0.4Pb, 余量 Zn) |
O.L.P process | 喷石灰粉顶吹氧气炼钢法 |
O.L.P. process | 氧气喷石灰粉炼钢法 |
O.L.P. process | O.L.P 转炉炼钢法 (【技】 OCP 转炉炼钢法的另一名称。 OCP 源于法文 Oxygene-Chaux-Pulverise 的首字母;而 OLP 源于英文 Oxygen-Lime-Powder 的首字母。) |
O.L.P process | OLP法 |
on deck B/L | 船上交货提单 |
on deck B/L | 甲板装载提单 |
oxy-L.-P. gas cutting | 氧液化石油气切割 |
R.U.L. test | 负荷还原试验 |
S/L interface | 固/液界面 |
steel type L | L 型优质钢 (【技】非金属杂质和残余元素含量低,抗内氧化性能优良,用作食品容器的优质钢。) |
steel type L | L型优质钢 |
T-l steel | T-l 易焊高强度钢 |
T-l steel | T-l 易焊高强度钢商品名 |
V.L.N. process | 低氮钢冶炼法 |
V.L.N. steel | 低氮钢 |
V.L.N. steel | 极低氮钢 |
V.L.N. steel plant | 极低氮钢炼钢厂 (使用蒸汽氧气底吹转炉) |
V.L.N.steelplant | 低氮钢炼钢厂 |
V-L-S growth | 汽-液-固生长 |
world-wide L-D capacity | 世界氧气顶吹转炉生产能力 |