inner – phrases

Terms for subject Metallurgy containing inner | all forms | exact matches only

English	Chinese
bicycle inner tube	自行车内胎管
bond strength between inner and outer layers	内外层间结合强度 (【技】由于形成了化学成分和凝固结构在厚度方向上均匀连续变化的过渡层，因而复合钢板坯的内外层间结合强度十分牢固。)
effective inner volume	铁有效内容积 (高炉的)
effective inner volume	高炉有效容积
effective inner volume of BF	高炉有效容积 (【技】炉料在高炉内实际占有的容积。一般规定，由高炉出铁口中心线所在平面，到大料钟在下降位置时其下沿水平面之间的高炉容积，叫做高炉有效容积。该容积的高度叫高炉有效高度。)
gas flow inner/outer regulator	煤气流量入口/出口调节器
inclusion gather at quarter point thickness from inner curved surface	距内弧面 1/4 厚度处夹杂物聚集 (【技】由于弧形连铸机铸坯液相穴内夹杂物上浮受阻而被内弧侧捕捉，故造成距内弧面1/4厚度处夹杂物聚集。)
inner bottom	内底
inner bremsstrahlung	内层韧致辐射
inner-cased	带内衬的
inner coat	内镀层
inner coat	内涂层镀层
inner coil	内蛇管
inner collar	【压】中间辊环
inner collar	中间辊环
inner condenser	内冷凝器
inner condensing tube	内冷凝管
inner cooled	内部冷却的
inner cover	马弗罩
inner cover	内罩
inner crack	内部裂纹
inner curvature radius of strand	铸坯内弧半径
inner curve side	内弧侧
inner curve wall	内弧壁
inner curved frame	内弧框架
inner curved radius of strand	铸坯内弧半径
inner curved surface	内弧面
inner curved surface of strand	连铸坯内弧面
inner curved surface of strand	铸坯内弧面
inner deforming loss	内变形损耗
inner diameter of nozzle	水口内径
inner diameter of shroud	保护套管内径
inner diameter of sleeve	袖砖内径
inner diameter of submerged entry nozzle	浸人式水口内径
inner die surface	模里表面
inner electron	内层电子
inner equipment	内部设备
inner face	内面
inner fish plate	内鱼尾板
inner flame cone	内焰心
inner frame of segment	扇形段内弧架
inner kiln radius	回转窑内半径
inner layer molten steel	内层钢水 (【技】在复合钢板坯连铸过程中：形成复合钢板坯内层的钢水。)
inner layer of clad steel slab	复合钢板坯内层
inner layer pool	内层熔池
inner layer pouring rate	内层浇注速度 (【技】在复合钢板坯连铸中，形成复合钢板坯内层钢水的浇注速度。)
inner energy level	内能级
inner liner	内衬套
inner lining	内衬
inner mold	内结晶器 (用于浇注中空圆坯)
inner mold surface	结晶器内表面
inner nozzle	内注口
inner nozzle wall	水口内壁
inner profile	内炉型
inner profile	内炉型
inner race	内座圈
inner radius of strand	铸坯内弧面
inner radius wide face water jacket	内弧宽面水套 (结晶器的)
inner rim	内齿圈
inner rim	内轮缘
inner ring	内环
inner segment frame	扇形段内弧架
inner segregation	内部偏析
inner sleeve	内辊套
inner spiral pipe	内螺纹管 (tube)
inner strain	内部变形
inner strand spacing	【连】铸流间距
inner-strand spacing	铸流间距
inner stress	内应力
inner surface	内表面
inner surface of submerged entry nozzle	浸人式水口内表面
inner toothed sleeve coupling	内齿式联轴节套
inner tuyere	【钢】内风嘴
inner volume	内容积
inner volume	内部容积
inner wall of nozzle	水口内壁
inner wall of SEN	浸人式水口内壁 (The first alumina layer on the inner wall of the SEN is an ideal substrate for the next deposition and accumulation of inclusions from the molten steel. 在浸人式水口内壁上形成的第一层 Al₂O₃ 层是钢水中夹杂物继续沉淀和积聚的理想基底层。)
inner wire	内层钢丝 (钢丝绳的)
liquid steel for inner layer	内层钢水
mandrel inner cooling	芯棒内部冷却
out and inner race case-hardening	轴承内外座圈表面硬化
pouring rate into inner layer	内层浇注速度
ram-and-inner-frame machine	锤-架式高速锤
ram-and-inner-frame machine	【压】锤头内架式高速锤
ram-and-inner-frame machine	锤头内架式高速锤
sleeve's inner diameter	袖砖内径
snorkel inner diameter	浸渍管内径 (RH 装置的)
strand inner-to-outer-curved surface water distribution ratio	铸坯内外弧面配水比
vessel inner diameter	真空室内径 (RH 装置的)
water distribution ratio between inner and outer curved surfaces of strand	铸坯内外弧面配水比
water distribution ratio of inner to outer curved surface of strand	铸坯内外弧面配水比

Get short URL