Sign in | English | Terms of Use
DictionaryForumContacts

   English ⇄
Terms for subject Metallurgy containing deformation | all forms | exact matches only
EnglishChinese
additional deformation附加变形
adiabatic deformation绝热变形
amount of cold plastic deformation冷塑【范】性变形量
amount of cold plastic deformation冷塑性形变量
amount of cold plastic deformation冷范性形变量
amount of deformation变形量
anelastic deformation滞弹性变形
asymmetric deformation of mold结晶器非对称变形
average deformation rate平均应变速率
average deformation rate平均变形速率
axisymmetric deformation轴对称变形
baked pellet deformation zone焙烧球团变形区
bands of deformation形变带
basic deformation基本变形
bulging deformation rate鼓肚变形率
characteristics of billet deformation小方坯变形特点
cold deformation冷变形 (【技】金属塑性变形温度低于该金属的再结晶温度时有加工硬化现象，称这种变形为冷变形或冷加工。钢在常温下的冷轧、冷拔、冷冲压等均属冷变形。)
cold deformation冷加工
cold plastic deformation冷塑性变形
compression stress-deformation diagram压缩应力应变图
compression stress-deformation diagram压缩应力-应变图
compressive load deformation压缩负载变形
concurrent deformation伴生变形
consolidation cast metal by deformation金属铸件变形致密化
consolidation of cast metal by deformation金属铸件变形致密化
containment roll deformation夹持辊变形
continuously cast product deformation连铸坯变形
converter shell deformation转炉炉壳变形
creep deformation蠕变变形 (【技】虽然材料所受应力水平远远低于材料的屈服极限，但随着时间的推移材料也会产生缓慢的累积塑性变形。这种变形是不可恢复的，称为蠕变变形。)
critical deformation临界变形
critical plastic deformation临界塑性变形
curve of deformation resistance vs strain变形抗力-应变曲线
deformation alloy变形合金
deformation-assisted nucleation变形促进成核
deformation-assisted nucleation变形促进形核
deformation at low temperature低温变形
deformation axis形变轴
deformation band形变带 (【技】材料变形过程中出现在单个晶粒内的位向与晶粒其余部分明显不同且具有很高位错密度的带状区域)
deformation behaviour变形行为
deformation characteristics变形特性
deformation condition变形状态
deformation degree变形程度 (【技】塑性变形时，工件变形大小的定量指标，用变形前后工件的尺寸计算。有绝对变形程度、相对变形程度、延伸系数和对数应变四种表示法。)
deformation due to chilling急冷变形
deformation due to hardening淬火变形
deformation due to pressure压力变形
deformation due to stress应力变形
deformation force变形力
deformation-free lattice无变形晶格
deformation-free mold未变形结晶器
deformation-free steel无变形钢
deformation-free steel plate未变形钢板
deformation history变形历程
deformation history变形过程
deformation in compression压缩变形
deformation-induced crystal imperfections变形引起的晶体缺陷
deformation line形变线
deformation line变形线
deformation mechanism形变机理
deformation mode变形模式
deformation mode变形形式
deformation nonuniformity变形不均匀性
deformation of low temperature低温变形
deformation of particle颗粒变形
deformation of rapidly cooled strip速冷带钢变形
deformation of single crystal单晶体变形
deformation point变形温度
deformation point变形点
deformation rate变形速率 (【技】塑性变形时，单位时间内工件的平均变形程度，亦称为平均应变速率 (average deformation rate)。)
deformation rate in two-phase zone两相区变形率
deformation resistance变形阻力
deformation resistance变形抗力
deformation resistance mathematic model变形抗力数学模型
deformation resistance of steel钢变形阻力
deformation speed变形速度 (【技】轧件通过变形区时单位时间的相对压下量。变形速度等于压下量除以变形前后工件的平均高度，再除以工件通过变形区的时间。)
deformation temperature变形温度 (【技】塑性变形时变形区工件所具有的温度。变形温度取决于材料变形前的加热温度、变形时因能量转化导致的升温以及与周围介质热交换导致的温降等，是不断变化的。)
deformation texture形变织构
deformation texture变形织构
deformation-time plot变形-时间曲线图
deformation-time plot变形-时间图表曲线
deformation twin变形李晶
deformation twin变形孪晶
deformation twinning孪生变形
deformation velocity变形速度
deformation vibration变形振动
deformation work变形功
deformation work softening形变加工软化
deformation zone【压】 变形区 (【技】在轧制作业时，从轧件与轧辊接触时起，至轧件离开轧辊为止的时间区间内，上下两个接触面之间的区域为变形区。)
deformation zone变形区
degree of deformation变形程度
degree of deformation变形度
delayed deformation延迟形变
delayed deformation缓发形变
die wall deformation模壁变形
difficult-to-deformation steel难变形钢
directed diffusion deformation定向扩散变形
dog-bone deformation八字变形 (轧制缺陷)
dog-bone deformation狗骨变形 (轧制缺陷)
elastic deformation弹性变形 (【技】物体在外力的作用下就会产生变形。去除外力后，物体能够完全恢复它原来的形状与尺寸。这种变形称之为弹性变形。)
elastic deformation compensation system弹性变形补偿系统
elastic deformation of die模具弹性变形
elastic deformation of furnace shell炉壳弹性变形
elastic deformation of mill housing【压】 轧机牌坊的弹性变形
elastic deformation of mold结晶器弹性变形
elastic deformation of steel sheet薄钢板弹性变形
elastic deformation of strand铸坯弹性变形
elastic residual deformation弹性残余变形
element of metal deformation金属变形要素
elevated temperature deformation高温变形
elevated temperature deformation升温变形
elevated temperature deformation髙温变形
elevated temperature deformation process升温变形法
energy of deformation变形能
exit of deformation zone变形区出口
extent of deformation变形程度
fatigue deformation疲劳变形
field of plane deformation平面形变区
flexural deformation【压】 挠曲变形
fluid deformation流变 (无定形物体受应力时的变形)
forging deformation锻造变形
grain boundary deformation晶界变形
grain deformation晶粒变形
heat by deformation变形热
high energy rate deformation高能速变形〔加工〕
high energy rate deformation高能速变形
high temperature deformation高温变形
high-energy rate deformation高能速变形
hot deformation热变形 (【技】金属塑性变形时，其变形温度高于该金属的再结晶温度就不产生加工硬化，这种变形称为热变形或热加工。)
hot surface deformation measuring instrument热表面变形测定仪
housing deformation机架变形
hyperelastic deformation超弹性变形
index of plastic deformation塑性变形指数
index of plastic deformation塑性变形率
inhomogeneous deformation不均匀变形
initial deformation初期变形
initial deformation初期起始变形
initial deformation temperature起始变形温度
initial deformation temperature初期起始变形温度
internal deformation内部变形
large deformation塑性变形
large deformation大量变形
lateral deformation横向变形
lattice deformation点阵变形
lattice deformation晶格变形
lattice invariant deformation点阵的不变变形
lattice invariant deformation晶格的不变变形
linear deformation纵向变形
load-deformation curve载荷-变形曲线
load-deformation diagram载荷-变形图
low temperature deformation低温变形
macroscopic deformation宏观变形
macroscopic deformation宏观形变
macroscopic plastic deformation宏观范性形变
macroscopic plastic deformation mechanism宏观范性形变机理
magnetic deformation磁致伸缩
magnetic deformation磁性变形
magnetization curve under plastic deformation塑性变形过程中的磁化曲线
martensite deformation point马氏体变形加工点
martensite deformation pointMd点
martensite deformation point变形诱发马氏体的最高温度 (Md 点)
mean deformation resistance平均变形抗力
mechanical deformation机械变形
mechanical deformation vacuum gauge机械形变真空计
mechanism of plastic deformation塑性形变机理
mechanism of plastic deformation范性形变机理
mechanism of plastic deformation塑性变形机理
mode of deformation形变方式
mold deformation结晶器变形
neck-free deformation无缩颈变形
non-deformation alloy不变形合金
nonhomogeneous deformation非均匀变形
nonstationary deformation不稳定变形
non-uniform deformation非均匀变形
nonuniformity of deformation变形不均匀性
overall deformation总变形
overall deformation全变形
pellet deformation zone球团变形区
permanent broad plate deformation宽面板永久变形
permanent creep deformation永久蠕变变形
permanent deformation永久变形 (【技】材料经受一定时间的应力之后，不能恢复的变形称为永久变形。)
permanent deformation永久性变形
permanent deformation of copper mold tube结晶器铜管永久变形
plane deformation平面变形
plastic deformation塑〔范〕性变形
plastic deformation范性形变 (【技】材料在外力作用下产生变形，外力消除后，不恢复原来的形状而保留下来的变形为塑性变形。)
plastic deformation范性变形
plastic deformation by slip滑移引起的范性变形
plastic deformation by slip滑移引起的范性形变
plastic deformation effect塑性变形效应
plastic deformation effect范性形变效应
plastic deformation mechanism塑性变形机理
plastic deformation mechanism范性形变机理
plastic deformation of cast product铸坯塑形变形
plastic deformation of lattice晶格范性形变
plastic deformation of lattice晶格塑形变形
plastic deformation of lattice晶格范性变形
plastic deformation of lattice晶格塑性变形
plastic deformation of strand铸坯塑形变形
plastic deformation resistance塑性变形阻力
plastic deformation work塑性变形功
plastic deformation zone塑性变形区
plastoelastic deformation弹塑性变形 (【技】材料在外力作用下产生变形。外力消除后，不恢复原来的形状而保留下来的变形为塑性变形。塑性变形总是伴随着弹性变形的，习惯称其为弹塑性变形。)
point deformation点变形
prior plastic deformation预塑性变形
pseudoelastic deformation准弹性变形
pseudoplastic deformation准塑性变形
quasi-elastic deformation准弹性变形
quenching deformation淬火变形
radial-draw deformation径向拉延变形
redundant deformation附加变形
redundant deformation过剩变形
relative deformation相对变形
resistance of deformation抗变形力
resistance to corrosion and deformation耐腐蚀和抗变形能力 【性能】 (The stainless steels have an excellent combination of resistance to corrosion and deformation, and maintenance of high strength at elevated temperatures. 这些不锈钢具有卓越的耐腐蚀和抗变形综合性能，在高温下仍能保持高强度。)
resistance to deformation变形阻力
resistance to deformation金属轧件对轧辊的单位压力
resistance to deformation抗变形能力
resistance to plane homogeneous deformation金属的均匀面变形阻抗力
resistance to plane homogeneous deformation均匀面变形阻抗力
resistance to plastic deformation塑性变形阻力
resistance to plastic deformation范性变形抗力
round deformation圆坯变形
secondary deformation二次变形 (【技】钢板经冷轧离开辊缝后由于纵向延伸不均而引起的附加变形称为二次变形。)
shear deformation剪切形变
shell deformation坯壳变形
shock deformation冲击变形
slab mold deformation板坯结晶器变形
slip deformation滑移形变
speed of deformation变形速度
spontaneous deformation自发变形
steel resistance to deformation钢的变形阻力
stored energy of deformation变形储能
straightening deformation rate矫直变形率
strand deformation连铸坯变形
strand deformation at curved section弧形段铸坯变形
strand deformation rate铸坯变形速率
strand shell deformation铸坯壳变形
strand shell deformation rate铸坯壳变形率
stress-deformation diagram应力-应变图
stress-deformation diagram应力一应变图
subzero deformation零下变形
subzero deformation零下形变
tectonic deformation构造变形
temperature of deformation形变温度
tensile deformation拉伸形变
tensile stress-deformation diagram拉伸应力-应变【变形】图
tensile stress-deformation diagram拉伸应力-应变图
theory of stability of plastic deformation范性形变稳态理论
thermally activated deformation热活化的变形
thermally activated deformation热活化变形
thermoplastic deformation热塑性变形
three-dimensional strip deformation三维带钢变形
three-dimensional strip deformation带钢三维变形
threshold deformation逾限变形
threshold deformation临阈变形
time-deformation curve时间与变形关系曲线
time-deformation curve时间一变形关系曲线
torsional deformation扭转变形
total deformation总变形
total deformation全变形
total work of deformation总变形功
total work of deformation应变总能
total work of deformation变形总功
transversal deformation横向变形
twin deformation李晶变形
twin deformation双晶变形
twin deformation孪晶变形
unbending deformation rate矫直变形率
unhomogeneity of deformation变形的不均匀性
uniform deformation均匀变形
unit deformation单位变形
very high rate of deformation极高速变形
very high rate of deformation高速压力加工
very high rate of deformation高速变形
virtual deformation虚变形
warm deformation温变形 (【技】材料在高于室温但低于再结晶温度范围内进行的塑性变形的过程。)
welding deformation焊接变形
work done in deformation变形功
work of deformation形变功
work roll deformation工作辊变形
zone of deformation【压】 变形区
zone of plastic deformation塑性变形区

Get short URL